Skip to content
APB Inc. Metal Stud BuildersCSLB #951030Class B · Verify license
Let’s build in steel
APB Inc.

CSLB #951030 · Class B · First issued 2010

Steel / Illustrated

Steel framing for homes

Light-Gauge Steel Framing, Built to Your Plans

Light-gauge steel framing for walls, floor joists and roof, built from your engineered plans.

  • Walls, floor joists and roof
  • Los Angeles · Ventura · Orange counties

CSLB #951030 · first issued 2010 · verify on cslb.ca.gov (opens in a new tab)

3D illustration: a steel wall panel, studs and track

We frame in steel. You keep your design.

We frame in light-gauge (cold-formed) steel: walls, floor joists and roof. We work from the plans you already have: the homeowner's, the architect's or the general contractor's. We are not a factory selling a catalog model. You keep your design.

A California-licensed engineer stamps the structural drawings and calculations. APB coordinates the engineering: we're the framing contractor, not an engineering firm. The steel panels are fabricated in Utah to those drawings and arrive on site numbered, so the crew sets them in order. We coordinate hold-downs and anchors with the foundation and hand off a straight, square frame to the trades that follow.

  • G90Galvanized steel: 0.90 oz of zinc per square foot, 50% more than G60
  • NumberedPanels fabricated to the stamped drawings and set in order on site
  • ~90 daysFrom signing to panels on site when a wood plan is converted, in our experience

No plans yet? We coordinate the drawings with a licensed designer and a California-licensed engineer, drawn in steel from the start. It takes longer than starting from a finished set, and we say so up front.

The frame package, layer by layer.

Pick a layer to isolate it, or pull the frame apart. The model shows the walls and the roof of a house on its slab; on your job we also frame the floor joists where the plans call for them.

3D illustration: a light-gauge steel house frame on its slab, the roof trusses lifted above the walls

3D illustration

The whole package

Walls and roof in light-gauge steel, built from your engineered plans. Pick a layer to isolate it, or pull the frame apart.

Walls
Studs, track, framed openings, bracing
Roof
Steel trusses and bracing

Demonstration frame with typical member sizes. On a real project, every member, spacing and connection is set by a California-licensed engineer.

What's included, and what stays with your team.

APB frames

  • Load-bearing and non-load-bearing walls
  • Steel floor joists (the floor deck is by others)
  • Roof framing
  • Factory-built steel panels, fabricated in Utah and shipped to your site
  • Coordination with your engineer, architect and general contractor
  • Trade coordination for electrical and plumbing penetrations

Your team keeps

  • Foundation and slab
  • The floor deck over our steel joists
  • Mechanical, electrical and plumbing
  • Insulation and drywall
  • Windows, doors, roof coverings and finishes

Building a home and an ADU on the same lot? We frame both.

Side view of the whole house framed in light-gauge steel, with the roof framing complete from end to end
The whole frame, roof on · Pacific Palisades

Steel is the structure, not the style.

Stone, stucco, glass or wood siding: the frame behind the finish is light-gauge steel. You choose the architecture. We frame what holds it up.

From your plans to a standing frame.

  1. Plans

    Send your set, or start without one: we coordinate new drawings with a licensed designer and engineer, drawn in steel.

  2. Steel review

    We check the layout, spans and site for steel, and tell you what changes.

  3. Engineering

    A California-licensed engineer stamps the structural drawings and calculations. APB coordinates the engineering: we're the framing contractor, not an engineering firm.

  4. Plan check

    A wood set converted to steel goes back as a plan revision; a new set goes in as a new submittal. Review time is set by your building department.

  5. Panels and framing

    Panels are fabricated in Utah to the stamped drawings and arrive numbered. Our crew sets them in order and frames the walls, floor joists and roof.

The clock. When a wood plan is converted to steel, panels typically reach the site about 90 days from signing, in our experience. A plan drawn in steel from the start skips the conversion step. Starting without plans adds the design stage first. Plan check runs on your building department's clock.

Prefabricated steel wall panel marked L29 lying on the slab: studs, track and pre-punched holes for plumbing and wiring
Panel L29 on the slab: studs, track and pre-punched holes for plumbing and wiring · Pacific Palisades

Made for one place in your house.

Every panel is built for one place in your house, labelled, and pre-punched for the trades. When they arrive, the crew sets them in order instead of cutting studs on the lot.

Questions about steel framing.

Can you frame my house from my architect's plans?

Yes. We work from the plans you already have: the homeowner's, the architect's or the general contractor's. If they're drawn for wood, the structure is converted to steel as a plan revision. A California-licensed engineer stamps the structural drawings and calculations. APB coordinates the engineering: we're the framing contractor, not an engineering firm. Wood-to-steel plan conversion →

Do you build the whole house?

No. We frame the walls, floor joists and roof in light-gauge steel. Your general contractor and trades build the foundation, the floor deck over our joists, the systems and the finishes.

What steel do you frame with?

G90 galvanized light-gauge steel. The engineer sets the member sizes, gauges and spacing for your project. Metal stud gauge chart →

Do you frame ADUs?

Only together with a home. Building a home and an ADU on the same lot? We frame both. We don't take standalone ADU projects.

Do you publish prices?

No. Every steel frame is engineered for its own plans, so we review the plans before we talk about cost.

The first steel walls standing on the slab, with framed door openings and temporary bracing

Send your plans.

Send your plans and tell us where the project is. Every steel frame is engineered, so we start by reviewing your drawings, not by quoting from a price list. No plans yet? Start here, and we'll coordinate a set drawn in steel from the start.

Check your address first: fire zone, fire perimeter and who issues your permit

Send your plansSend plansNo plans yet?No plans?
WhatsApp