
Wildfire rebuild guide
Rebuilding in Altadena with Steel Framing: A
Rebuilding a steel-frame home in Altadena after the Eaton Fire: LA County like-for-like rules, self-certification, standard plans, fees and permit steps.
CSLB #951030 · first issued 2010 · verify on cslb.ca.gov (opens in a new tab)
A steel frame from the slab · our Pacific Palisades job
Short answer
Altadena is unincorporated LA County, so LA County handles rebuild permits. Like-for-like rebuilds can be up to 10% or 200 square feet larger, whichever is greater, but must meet current building codes. Steel framing is allowed with engineered, stamped plans; switching a pre-approved wood plan to steel sends it to general review.
Because Altadena is unincorporated, Los Angeles County, not a city, issues its rebuild permits. This guide covers the County rules that matter most if you are considering light-gauge steel (LGS) framing for an Eaton Fire rebuild. If your lot is inside the City of Pasadena, the City's own rules apply instead; see the Pasadena section.
Rules and programs have changed often since January 2025. Treat this page as a starting point and confirm details with LA County before you commit to a path.
Can I use steel framing for a fire rebuild in Altadena?
Yes. Light-gauge steel is a recognized construction method under the California Residential Code, and nothing in the County's like-for-like rules is tied to framing material. What changes is the paperwork: LA County's fire-rebuild submittal requirements call for calculations by a licensed professional for nonconventional construction, so a steel house needs stamped structural drawings, and the energy design has to account for heat flow through steel studs. Start by checking your address for fire hazard zone, burn perimeter and climate zone.
LA County rebuild rules that apply in Altadena
Like-for-like rebuilds
For the Eaton Fire area, LA County allows a like-for-like rebuild that does not increase floor area, size, height or building footprint by more than 10% or 200 square feet, whichever is greater.
- Like-for-like rebuilds do not have to meet the current Zoning Code.
- They do have to meet the current Building, Fire and Health and Safety Codes. For most applications submitted in 2026, that means the 2025 California codes, including the new Wildland-Urban Interface Code. Executive Order N-29-25 lets Eaton Fire rebuilds comply with the 2022 code instead, so confirm which edition your project will use.
- Rebuilds that are not like-for-like follow the Zoning Code, including the Altadena Community Standards District, with some changes for fire rebuilds. For example, the County says the Community Standards District's front-yard setback does not apply, and the minimum front yard for non-like-for-like rebuilds is 20 feet.
Framing material is not part of the like-for-like test. A steel-framed house within the size limits can still qualify, but confirm with the County for your project.
The County also says initial review of like-for-like projects is within 10 business days, with rechecks within 5 business days. Like-for-like applications generally must be submitted within two years of the emergency declaration, with extensions available from the Director of Regional Planning. An issued building permit expires in 12 months if construction does not begin, and debris removal must be finished before a building permit is issued.
Self-certification pilot
LA County runs a Building Plan Self-Certification Pilot. Qualified California-licensed architects and engineers can certify that plans meet the County Building Code, skipping full County plan check.
- Eligible projects are replacement single-family homes, garages and ADUs lost or damaged in the Eaton or Palisades fires, in unincorporated areas under Public Works jurisdiction.
- Properties in geologically sensitive areas, such as some hillside, liquefaction or land-movement zones, are excluded.
- Projects must use County-approved design, materials and methods.
- At least 20% of self-certified plans are randomly audited, every project is inspected, and approvals from Regional Planning, Fire and Public Health are still required.
We have not confirmed whether a steel-framed design falls within "County-approved design, materials and methods" for this pilot. Ask Public Works before choosing this route.
Pre-approved standard plans
The County offers a catalog of pre-approved single-family and ADU designs. The County states that these designs cannot be customized, and that a changed plan must go through the general review process. You also contract with the design professional who owns the plan.
That means converting a wood catalog plan to steel removes its pre-approved status. We have not confirmed a steel-framed plan in the County catalog. If you want both speed and steel, check the current catalog yourself, or plan for a custom review.
Fees
LA County's Board of Supervisors approved a motion on June 17, 2025 to waive and refund County permit fees for qualifying owners rebuilding single-family homes in unincorporated areas. Based on the County's FAQ and fee page:
- Eligible owners both owned and lived on the property before January 7, 2025, in unincorporated LA County, and the home was destroyed or irreparably damaged by the Eaton or Palisades fire.
- County fees covered include zoning, building plan review, soils and geology review, building permit and inspection, fire and public health fees.
- Design and builder costs, addressing fees, corner record survey fees, construction recycle and reuse deposits, and external agency clearances such as utility and school district fees are not covered.
- A home that is still standing may qualify for a fee deferral, evaluated case by case.
- Rentals, LLC- or corporation-owned properties and commercial or multifamily buildings are not eligible.
- Refunds go to the original payee.
The County's program page is titled fee deferrals and refunds, so confirm the current terms and which fees apply to your project before relying on a waiver. See the County's fee deferrals and refunds page for the current status.

Is your lot in the City of Pasadena?
Part of the Eaton Fire burn area is inside the City of Pasadena, which reviews rebuild plans and issues its own permits. The County programs above, including its like-for-like rules, self-certification pilot and fee waiver, cover unincorporated areas, and LA County's rebuild page sends Pasadena residents to the City. According to a July 2026 City staff report, the Eaton Fire destroyed 185 structures in Pasadena, most of them single-family homes and accessory buildings in the Upper Hastings Ranch, Victory-Rose, Dundee Heights and NATHA neighborhoods.
- Rebuild ordinance. In March 2025 the City adopted an interim rebuild ordinance for structures red-tagged after the Eaton Fire. Its summary says owners can rebuild without a City land use entitlement if the project is in a similar location, is no more than 10% larger than the original floor area or footprint, or 200 square feet for certain projects, and is no more than 10% taller. Like the County's rules, it looks at location, size and height, not framing material. The ordinance is temporary, so confirm it still applies when you submit.
- Fees. The City's Fire Rebuild Fee Waiver and Refund Program waives City plan check and permit fees for red-tagged structures on eligible sites: single-family homes or condominiums that were owner-occupied on January 7, 2025, rebuilt under the rebuild ordinance. Outside agencies' fees, such as school district and sanitation district fees, are not covered.
- Where to start. The City's Eaton Fire page offers a free 30-minute Planner-of-the-Day consultation and a rebuild permit status search by address.
Either way, expect structural drawings and calculations stamped by a California-licensed engineer for a steel frame. Check your address to confirm which permit office covers your lot.
Property tax and other reliefs that apply to any rebuild
These programs apply to eligible rebuilds whatever the framing material. Nothing in them favors steel over wood; steel is how we deliver the result, and these are how you reduce the friction.
- Expedited review. The County says initial review of like-for-like projects is within 10 business days, with rechecks within 5.
- Permit fees. See the fees section above for who qualifies and which fees are not covered.
- Property tax. Under Revenue and Taxation Code section 70.5, an owner who rebuilds a substantially equivalent home on the same site generally keeps the old Prop 13 base-year value. For the January 2025 fires, AB 245 and SB 663 extend the time to rebuild from 5 to 8 years, according to the State Board of Equalization. Larger or more valuable homes are reassessed on the excess. This is not tax advice; confirm with the County Assessor.
Insuring the house while it's framed
While you rebuild, the house is covered by builder's risk, a policy for the construction period only; the homeowners policy on the finished house is separate and priced on other things. Insurers set the builder's-risk premium partly by construction class. In one October 2026 quote for a steel-framed Los Angeles County rebuild, identical coverage priced about 40% lower in the fire-resistive class than in the wood-frame class. That is a single quote, not a rate to count on, and the insurer, not the framing, decides where a steel frame lands. Before you bind, ask your broker for both classes side by side and for the class in writing.
Paths at a glance
| Path | What it allows | What it means for steel framing |
|---|---|---|
| Like-for-like | Up to 10% or 200 sq ft larger, whichever is greater; Zoning Code exemption | Steel is allowed; engineered plans still required; current building codes apply |
| Non-like-for-like | Larger or different design under current zoning | Steel is allowed; Altadena Community Standards District applies |
| Self-certification pilot | Licensed professional certifies code compliance instead of full plan check | Confirm whether steel qualifies as County-approved design, materials and methods |
| Pre-approved standard plan | Faster review of a catalog design used as-is | Converting a wood plan to steel removes pre-approved status |

Title 24 energy code for a steel rebuild in Altadena
California's energy code (Title 24, Part 6) sets wall insulation requirements by climate zone. Altadena is generally in Climate Zone 9, but verify the zone for your address. Under the 2025 code, prescriptive framed walls in most climate zones, including Zone 9, target U-0.048. If your rebuild uses the 2022 code under Executive Order N-29-25, your energy consultant will use the 2022 targets instead.
Steel studs conduct heat, so cavity insulation alone generally does not meet these requirements in a steel wall. Continuous exterior insulation is usually part of the design, and your energy compliance documents have to be modeled for steel assemblies.
The same executive order, signed July 7, 2025, suspended the rooftop solar and battery requirement for homes rebuilt after the January 2025 fires. Homes must still be solar-ready, and an ADU built as part of rebuilding the main house gets the same exemption, according to LA County.
How to rebuild with steel in Altadena, step by step
1. Choose your path
Decide between like-for-like and a larger or different design, and between a custom plan and a pre-approved plan. That choice determines your zoning review and your timeline.
2. Check your site
Confirm your lot's fire hazard severity zone, any geologically sensitive area designation, and your energy climate zone. Our address check covers the fire zone and climate zone; the County confirms the rest.
3. Design or convert your plans
Work with your architect and a California-licensed engineer on stamped LGS drawings and calculations. If you already have wood plans, our wood-to-steel plan conversion service coordinates the change: a California-licensed engineer stamps the structural drawings and calculations, and APB coordinates the engineering, the hold-down and anchor schedule, the Title 24 update and the revision submittal. We're the framing contractor, not an engineering firm.
4. Design the envelope
Steel studs are noncombustible: they don't burn or add fuel. Fire ratings come from the full wall assembly, and wildfire survival also depends on the roof, vents, windows, siding and the 5-foot zone. See Steel Framing for Wildfire Rebuilds.
5. Submit and apply for fee relief
Submit online or in person, and file the County's fee deferral or refund request if you qualify.
6. Respond to plan check and pull your permit
Expect comments on the structural and energy documents. Your engineer and designer respond until the permit is issued.
7. Build
The foundation goes in with the anchors and hold-downs the steel design calls for, then the steel frame, then inspections at each stage.

Altadena One-Stop Permit Center
LA County's Altadena One-Stop Permit Center serves the Eaton Fire area:
464 W Woodbury Rd, Suite 210, Altadena, CA 91001 Phone: (626) 424-6743
The County lists walk-in permit hours and rebuild consultation appointments on its One-Stop Permit Centers page. Hours have changed over time, so confirm before you go.
Talk to us about your Altadena rebuild
Send your plans or your address and goals through our contact page. We will tell you whether steel framing fits your project and what the conversion would involve. Our steel fire rebuild service page explains how we work with your architect and general contractor. See a home we framed in Pacific Palisades.
Why homeowners choose steel framing with APB
Altadena owners rebuilding after the Eaton Fire are weighing speed, cost and what the new house will withstand. Steel gives you a frame that termites can't eat and that adds no fuel to a fire. A California-licensed engineer stamps the structural drawings and calculations, and we coordinate the engineering and the revision so your County review stays on track: we're the framing contractor, not an engineering firm. Read why steel framing pays off in California, see how wood-to-steel plan conversion works, or contact us with your address and plans.
Common questions
Can I rebuild my Altadena home with steel framing?
Yes, light-gauge steel is a recognized construction method under the California Residential Code. LA County's fire-rebuild submittal requirements call for licensed calculations for nonconventional construction, so expect engineered, stamped plans.
Does switching to steel affect my like-for-like status?
Like-for-like status is about size, height, footprint and location, not framing material. A steel rebuild within the size limits can still be like-for-like, but confirm with LA County for your project.
Can I use a County pre-approved plan and build it in steel?
LA County states that pre-approved plans cannot be customized and that changed plans go through the general review process. Converting a wood catalog plan to steel is a change, so it would be reviewed as a custom project.
Can my architect or engineer self-certify a steel-framed rebuild?
The County pilot covers single-family homes, garages and ADUs that use County-approved design, materials and methods, outside geologically sensitive areas. Ask LA County Public Works whether your steel-framed design qualifies.
Which building code applies to my Altadena rebuild?
New projects generally follow the 2025 California codes, effective January 1, 2026. Executive Order N-29-25 lets homes rebuilt after the Eaton Fire comply with the 2022 code instead, so confirm the edition with LA County before your designer finalizes the structural and energy documents.
Are permit fees waived in Altadena?
LA County's Board of Supervisors approved waiving and refunding County permit fees for eligible owners who both owned and lived in the home before January 7, 2025. Some fees, such as designer costs and outside agency clearances, are not covered, so confirm current terms with the County.
Do I keep my Prop 13 property tax base if I rebuild with steel?
Prop 13 relief depends on rebuilding a comparable home on the same site, not on the framing material. For the January 2025 fires the time to rebuild is extended from 5 to 8 years. Larger or more valuable homes are reassessed on the excess. This is not tax advice.
Where do I apply in person?
At the Altadena One-Stop Permit Center, 464 W Woodbury Rd, Suite 210, Altadena, CA 91001. Applications can also be submitted online through LA County's permit system.
Do LA County's rebuild rules apply in Pasadena?
No. The City of Pasadena reviews rebuild plans and issues its own permits; its interim rebuild ordinance allows a similar location, up to 10% or 200 square feet more and 10% more height. Confirm it is still in effect.
Sources
- LA County Recovery: Like-for-Like Rebuildrecovery.lacounty.gov (opens in a new tab)
- LA County Recovery: Building Plan Self-Certification Pilotrecovery.lacounty.gov (opens in a new tab)
- LA County Planning: Pre-Approved Standard Plansplanning.lacounty.gov (opens in a new tab)
- LA County Recovery: Fee Deferrals and Refundsrecovery.lacounty.gov (opens in a new tab)
- LA County Recovery: One-Stop Permit Centersrecovery.lacounty.gov (opens in a new tab)
- LA County Public Works: Fire Rebuild Minimum Submittal Requirementsladpw.org (opens in a new tab)
- LA County Building and Safety: Fire Hazard Severity Zone construction notes (2026 code)dpw.lacounty.gov (opens in a new tab)
- LA County: Executive Order N-29-25 implementation sheetfile.lacounty.gov (opens in a new tab)
- LA County Recovery: Suspension of solar installation requirementsrecovery.lacounty.gov (opens in a new tab)
- California Energy Commission: Building Energy Efficiency Standardsenergy.ca.gov (opens in a new tab)
- LA County Recovery: Frequently asked questionsrecovery.lacounty.gov (opens in a new tab)
- California State Board of Equalization: Letter to Assessors 2026/013 (Feb. 23, 2026)boe.ca.gov (opens in a new tab)
- City of Pasadena: City Council agenda report, July 20, 2026 (Eaton Fire rebuilds)ww2.cityofpasadena.net (opens in a new tab)
- City of Pasadena: Interim rebuild ordinance, March 17, 2025ww2.cityofpasadena.net (opens in a new tab)
- City of Pasadena: Fire Rebuild Fee Waiver and Refund Programcityofpasadena.net (opens in a new tab)
- City of Pasadena: Eaton Fire recoverycityofpasadena.net (opens in a new tab)

Rebuilding in Altadena?
Send the plans you have, or start without them. We'll tell you what a steel frame means for your lot and what LA County or the City of Pasadena will ask to see.
Check your address first: fire zone, fire perimeter and who issues your permit
